Улучшение понимания студентами-инженерами компонентов киберфизических систем с использованием метода обучения, основанного на командных проектах
https://doi.org/10.35596/1729-7648-2024-30-2-43-51
Аннотация
В статье описывается метод обучения, который использовался для обучения студентов второго курса мехатроники и робототехники компонентам киберфизических систем. Учитывая важность командного обучения, группа была разделена на пять подгрупп (студенческих команд), чтобы повысить эффективность за счет сравнения заданий, выполняемых командами. Для обучения использовался робот, следующий за линией. Этот курс был рассчитан на 48 академических часов. В результате студенты отметили, что после создания робота в командах их отношение к киберфизическим системам изменилось, и у них появилась мотивация выполнять более масштабные проекты, связанные с киберфизическими системами.
Ключевые слова
Об авторах
А. А. Чарыева
Инженерно-технологический университет Туркменистана имени Огузхана
Туркменистан
Туркменистан
Lecturer at the Department of Cyberphysical Systems
Ашгабат
С. М. Нокеров
Инженерно-технологический университет Туркменистана имени Огузхана
Туркменистан
Туркменистан
Nokerov Suleyman Malikmyradovich, Cand. of Sci. (Tech.), Senior Lecturer at the Department of Physics of High Technologies, Acting Dean of the Faculty of Cyberphysical Systems
744012, Ashgabat, Koshi St., 100
Tel.: +99 365 89-22-10
П. Э. Ходжагулыев
Инженерно-технологический университет Туркменистана имени Огузхана
Туркменистан
Туркменистан
Lecturer at the Department of Cyberphysical Systems
Ашгабат
А. М. Оразов
Инженерно-технологический университет Туркменистана имени Огузхана
Туркменистан
Туркменистан
Lecturer at the Department of Nano- and Biomedical Electronics, Vice-Dean of the Faculty of Cyberphysical Systems
Ашгабат
А. П. Венкатараман
Университет Матту
Эфиопия
Эфиопия
PhD, Assistant Professor at the Department of Electrical and Computer Engineering
Матту
Т. Бикку
Амрита школа вычислительной техники Амаравати, Амрита Вишва Видьяпитам
Индия
Индия
Thulasi Bikku, Associate Professor at the Department of Computer Science and Engineering
Тамил Наду
Список литературы
1. ETUT Reporter in THE (Times Higher Education). Available: https://www.timeshighereducation.com/world-university-rankings/oguz-han-engineering-and-technology-university-turkmenistan (Accessed 20 February 2024).
2. ETUT Membership in CDIO . Available: http://www.cdio.org/cdio-action/school-profiles/oguz-han-engineering-and-technology-university-turkmenistan (Accesed 20.02.2024).
3. Overall Rankings 2023 – UI GreenMetric. Available: https://greenmetric.ui.ac.id/rankings/overall-rankings-2023 (Accessed 20 February 2024).
4. ETUT Membership in IAU. Available: https://www.iau-hesd.net/university/oguz-han-engineering-and-technology-university-turkmenistan (Accessed 20 February 2024).
5. ETUT Membership in UniRank . Available: https://www.4icu.org/reviews/17169.htm (Accessed 20 February 2024).
6. About ETUT. Available: https://etut.edu.tm/about-us (Accessed 20 February 2024).
7. Bi Z., Xu L., Ouyang P. (2022) Smart Manufacturing – Theories, Methods, and Applications. Machines . 10. https://doi.org/10.3390/machines10090742.
8. Parhi S., Joshi K., Akarte M. (2021) Smart Manufacturing: A Framework for Managing Performance. International Journal of Computer Integrated Manufacturing , 34 (3), 227–256. https://doi.org/10.1080/0951192X.2020.1858506.
9. Gadepally V., Krishnamurthy A., Ozguner U. (2014) A Handson Education Program on Cyber Physical Systems for High School Students. arXiv:1408.0521 [cs.CY]. https://doi.org/10.48550/arXiv.1408.0521.
10. Ueter N., Chen K., Chen J.-J. (2020) Project-Based CPS Education: A Case Study of an Autonomous Driving Student Project. IEEE Design and Test . 37 (6), 39–46. https://doi.org/10.1109/MDAT.2020.3012085.
11. Nelke S. A., Winokur M. (2020) Introducing IoT Subjects to an Existing Curriculum. IEEE Design and Test . 37 (6), 24–30. https://doi.org/10.1109/mdat.2020.3005358.
12. Ghosh S., Mondal A., Kindt P. H., Sharma P., Agarwal Y., Dey S., et al. (2020) A Programmable Open Archi tecture Testbed for CPS Education. Design and Test. 37 (6), 31–38. https://doi.org/10.1109/MDAT.2020.3006798.
13. Lee E. A. (2015) The Past, Present and Future of Cyber-Physical Systems: A Focus on Models. Sensors.15 (3), 4837–4869. https://doi.org/10.3390/s150304837.
14. Gunes V., Peter S., Givargis T., Vahid F. (2014) A Survey on Concepts, Applications, and Challenges in Cyber-Physical Systems. KSII Transactions on Internet and Information Systems. 4242–4268. https://doi.org/10.3837/tiis.2014.12.001.
15. Alguliyev R., Imamverdiyev Y., Sukhostat L. (2018) Cyber-Physicalsystems and Their Security Issues. Computers in Industry. 100, 212–223. https://doi.org/10.1016/j.compind.2018.04.017.
16. Humayed A., Lin J., Li F., Luo B. (2017) Cyber-Physical Systems Security – A Survey. arXiv:1701.04525 [cs CR]. https://doi.org/10.48550/arXiv.1701.04525.
17. Sadiku M. N. O., Wang Y., Cui S., Musa S. M. (2017) Cyber-Physical Systems: A Literature Review. European Scientific Journal. 13 (36), 52–58. http://dx.doi.org/10.19044/esj.2017.v13n36p52.
18. Nokerov S., Hallayev D., Bashov S. (2020) “Android” Application Based Wirelessly Controlledmobile Roboticarm. Science and Technology of Youth. (1), 101–106.
19. Nokerov S., Hallayev D., Bashov S., Mashadov O., Garlyyev E., Pirjanov Y., et al. (2020) Remotely Controlled Mobile Robotic Arm. Science, Technology and Innovative Technologies in the Prosperous Epoch of the Powerful State, Abstracts of Papers of the International Scientific Conference. Part II, June 12–13, Ashgabat, Turkmenistan . 440–442.
20. Hojagulyyev P., Venkataraman A. P. (2022) Modern Automation Methods of Greenhouses. Science, Technology and I nnovative Technologies in the Period of the Revival of the New Epoch of the Powerful State, Abstracts of Papers of the International Scientific Conference. Part I, June 12–13, Ashgabat, Turkmenistan . 197–199.
21. Nokerov S., Ishangulyyev R., Hojagulyyev P., Venkataraman A. P., Khan K. A. (2022) Technology Development of Automated Contactless Hand Sanitizer Dispenser System with IR Sensor and Based on a PIC Microcontroller. In International Conference on Computer Systems and Technologies 2022 (CompSysTech ’22), June 17, 18. University of Ruse, Ruse, Bulgaria; ACM, NY, USA. 14–19. https://doi.org/10.1145/3546118.3546131.
22. Hojagulyyev P. E., Nokerov S. M., Annagurdov Y. A., Khan K. A. (2023) Innovative Technology for Smartcar Parking System. Sustainable Development Goals: Youth Policy and Innovative Technologies, Proceedings of International Scientific-Practical Conference, Feb. 15–16 , Oguzhan Engineering and Technology University of Turkmenistan . International Journal of Multidisciplinary Research Transactions . 5 (4), 131–132. https://doi.org/10.5281/zenodo.7782931.
23. Hojagulyyev P. E., Nokerov S. M., Tirkeshov A. T., Venkataraman A. P. (2023) Design of the Automatic Greenhouse Controller Using a PIC18F4550 Microcontroller. Sustainable Development Goals: Youth Policy and Innovative Technologies, Feb. 15–16, Proceedings of International Scientific-Practical Conference, Oguzhan Engineering and Technology University of Turkmenistan. International Journal of Multidisciplinary Research Transactions. 5 (4), 129–130. https://doi.org/10.5281/zenodo.7782911.
24. Annagurdov Y. A., Atayeva B., Hojagulyyev P. E. (2023) Development of a Mobile Robot Controlled by Virtual Reality Technology. Sustainable Development Goals: Youth Policy and Innovative Technologies, Proceedings of International Scientific-Practical Conference, Feb. 15–16, Oguzhan Engineering and Technology University of Turkmenistan. International Journal of Multidisciplinary Research Transactions . 5 (4), 156–157. https://doi.org/10.5281/zenodo.7783075.
25. Babayev A. K., Nokerov S. M., Jumanazarov A. N. (2023) Development of Smart System Forremote Control of Fan Coil Devicesof Heating and Cooling Systems. Sustainable Development Goals: Youth Policy and Innovative Technologies, Proceedings of International Scientific-Practical Conference, Feb. 15–16, Oguzhan Engineering and Technology University of Turkmenistan. International Journal of Multidisciplinary Research Transactions. 5 (4), 7–9. https://doi.org/10.5281/zenodo.7775693.
26. Nokerov S., Akmyradov G., Badulescu D. (2023) Analysis of the Optimal Location of Bank Automated Teller Machines (ATMs) in Turkmenistan. Oradea Journal of Business andEconomics. 8 (2), 103–113. http://doi.org/10.47535/1991ojbe177.
Рецензия
Для цитирования:
Чарыева А.А., Нокеров С.М., Ходжагулыев П.Э., Оразов А.М., Венкатараман А.П., Бикку Т. Улучшение понимания студентами-инженерами компонентов киберфизических систем с использованием метода обучения, основанного на командных проектах. Цифровая трансформация. 2024;30(2):43-51. https://doi.org/10.35596/1729-7648-2024-30-2-43-51
For citation:
Charyyeva A.A., Nokerov S.M., Hojagulyyev P.E., Orazov A.M., Venkataraman A.P., Bikku T. Improving Engineering Studentsʼ Understanding of Components of Cyber-Physical Systems Using a Team Project-Based Teaching Method. Digital Transformation. 2024;30(2):43-51. https://doi.org/10.35596/1729-7648-2024-30-2-43-51
Просмотров: 538
Послать статью по эл. почте 